Gmc 2004 Canyon Bedienungsanleitung PDF herunterladen (Seite 107)

4n(4LO): This setting also engages your front axle to

give you extra traction. It sends the maximum power

to all four wheels. You might choose 4LO if you

were driving off-road in sand, mud or deep snow and

climbing or descending steep hills.

Indicator lights in the buttons show you which setting

you are in. The indicator lights will come on brieﬂy when

you turn on the ignition and one will stay on. If the

lights do not come on, you should take your vehicle in

for service. An indicator light will ﬂash while shifting.

It will remain illuminated when the shift is completed.

If for some reason the transfer case cannot make

a requested shift, it will return to the last chosen setting.

Shifting from 2HI to 4HI

Press and release the 4HI button. This can be done at

any speed, and the front axle will lock automatically.

Shifting from 4HI to 2HI

Press and release the 2HI button. This can be done at

any speed, and the front axle will unlock automatically.

Shifting from 2HI or 4HI to 4LO

To shift from 2HI or 4HI to 4LO, the vehicle must be

stopped or moving less than 1.2 mph (2 km/h) with the

transmission in NEUTRAL (N) in vehicles equipped

with an automatic transmission or the clutch pedal

engaged in vehicles equipped with a manual

transmission. The preferred method for shifting into

4LO is to have your vehicle moving 1.2 mph (2 km/h).

Press and release the 4LO button. You must wait for

the 4LO indicator light to stop ﬂashing and remain

illuminated before shifting your transmission into gear or

releasing the clutch pedal.

If the 4LO button is pressed when your vehicle is in

gear and/or moving, the 4LO indicator light will ﬂash for

30 seconds and not complete the shift.

On automatic transmission equipped vehicles, if your

transfer case does not shift into 4LO, your transmission

indicator switch may require adjustment. With your

transmission in NEUTRAL (N), press and release the

4LO button. While the 4LO indicator light is ﬂashing, shift

your transmission into PARK (P). Press 4LO again.

Wait until the 4LO indicator light remains illuminated

before shifting your transmission into gear. Press

the 4LO button again to complete the shift. This will get

you into 4LO, but you should take your vehicle in for

service to restore normal operation.

2-27

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 419 420

Kommentare zu diesen Handbüchern

Keine Kommentare

Gmc 2004 Canyon Bedienungsanleitung Seite 107

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Gmc 2004 Canyon