Gmc 2007 Canyon Bedienungsanleitung PDF herunterladen (Seite 120)

To Use the Engine Coolant Heater

1. Turn off the engine.

2. Open the hood and unwrap the electrical

cord. The cord is located in the engine

compartment behind the underhood fuse block

on the driver’s side of the vehicle.

3. Plug it into a normal, grounded 110-volt AC

outlet.

{CAUTION:

Plugging the cord into an ungrounded

outlet could cause an electrical shock.

Also, the wrong kind of extension cord

could overheat and cause a ﬁre. You

could be seriously injured. Plug the cord

into a properly grounded three-prong

110-volt AC outlet. If the cord will not

reach, use a heavy-duty three-prong

extension cord rated for at least 15 amps.

4. Before starting the engine, be sure to unplug

and store the cord as it was before to keep it

away from moving engine parts. If you do

not, it could be damaged.

How long should you keep the coolant heater

plugged in? The answer depends on the outside

temperature, the kind of oil you have, and

some other things. Instead of trying to list

everything here, we ask that you contact your

dealer in the area where you will be parking your

vehicle. The dealer can give you the best

advice for that particular area.

Automatic Transmission Operation

Your automatic transmission has a shift lever on

the steering column.

It features an electronic shift position indicator

within the instrument cluster. This display must

be powered anytime the shift lever is capable of

being moved out of PARK (P). This means that if

your key is turned off, but not in LOCK, there will be

a small current drain on your battery which could

discharge your battery over a period of time.

120

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 491 492

Kommentare zu diesen Handbüchern

Keine Kommentare