Gmc 2007 Canyon Bedienungsanleitung PDF herunterladen (Seite 351)

Checking Brake Fluid

You can check the brake ﬂuid without taking off

the cap.

Look at the brake ﬂuid

reservoir. The ﬂuid level

should be above

MIN. If it is not have the

brake system checked

to see if there is a leak.

After work is done on the brake hydraulic system,

make sure the level is above the MIN but not

over the MAX mark.

What to Add

When you do need brake ﬂuid, use only DOT-3

brake ﬂuid. Use new brake ﬂuid from a sealed

container only. See Recommended Fluids

and Lubricants on page 447.

Always clean the brake ﬂuid reservoir cap and the

area around the cap before removing it. This

will help keep dirt from entering the reservoir.

{CAUTION:

With the wrong kind of ﬂuid in the brake

system, the brakes may not work well, or

they may not even work at all. This could

cause a crash. Always use the proper

brake ﬂuid.

Notice:

• Using the wrong ﬂuid can badly damage

brake system parts. For example, just a

few drops of mineral-based oil, such

as engine oil, in the brake system can

damage brake system parts so badly that

they will have to be replaced. Do not

let someone put in the wrong kind of ﬂuid.

• If you spill brake ﬂuid on your vehicle’s

painted surfaces, the paint ﬁnish can

be damaged. Be careful not to spill brake

ﬂuid on your vehicle. If you do, wash it

off immediately. See Washing Your Vehicle

on page 419.

351

1 2 ... 346 347 348 349 350 351 352 353 354 355 356 ... 491 492

Kommentare zu diesen Handbüchern

Keine Kommentare