Gmc 2007 Canyon Bedienungsanleitung PDF herunterladen (Seite 384)

100

101

When rotating your tires, always use one of the

correct rotation patterns shown here.

If your vehicle has a compact spare tire or a spare

tire that does not match your vehicle’s road tires

and wheels, in size and type, do not include

the spare in the tire rotation.

After the tires have been rotated, adjust the front

and rear inﬂation pressures as shown on the

Tire and Loading Information label. For the location

of the Tire and Loading Information label see

Loading Your Vehicle on page 286. Make certain

that all wheel nuts are properly tightened, see

“Wheel Nut Torque” under Capacities and

Speciﬁcations on page 430 for the proper wheel

nut torque speciﬁcation.

{CAUTION:

Rust or dirt on a wheel, or on the parts to

which it is fastened, can make wheel nuts

become loose after time. The wheel could

come off and cause an accident. When

you change a wheel, remove any rust or

dirt from places where the wheel attaches

to the vehicle. In an emergency, you can

use a cloth or a paper towel to do this;

but be sure to use a scraper or wire brush

later, if needed, to get all the rust or dirt

off. See Changing a Flat Tire on page 394.

Any time you rotate the vehicle’s tires the Tire

Pressure Monitor System (TPMS) will need to be

reset. The TPMS identiﬁcation codes will need

to be matched to the tire and wheel position. See

“TPMS Sensor Identiﬁcation Codes” under Tire

Pressure Monitor System on page 378.

384

1 2 ... 379 380 381 382 383 384 385 386 387 388 389 ... 491 492

Kommentare zu diesen Handbüchern

Keine Kommentare

Gmc 2007 Canyon Bedienungsanleitung Seite 384

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Gmc 2007 Canyon